Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
7. Install the exhaust pipe heat shield bolts and tighten to 10 Nm (89 lb in).
8. Install the left side exhaust heat shield (3) at the dash panel.
9. Install the heat shield nuts (2) and tighten to 9 Nm (80 lb in).
10. Install the transmission. Refer to Transmission Replacement (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair).
11. Install the turbocharger exhaust pipe. Refer to Turbocharger Exhaust Pipe Replacement (6.6L) (See: Turbocharger Exhaust Pipe Replacement).