Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
2. Install the suction hose to the accumulator.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the NEW suction hose nut to the accumulator.
Tighten the nut to 16 Nm (12 lb ft).
4. Install the suction hose to the compressor (1).
5. Install the NEW suction hose mounting bolt (3).
Tighten the bolt to 16 Nm (12 lb ft).
6. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (Non-HP2) (See: Refrigerant/Service and Repair
)Refrigerant Recovery and Recharging (HP2) (See: Service and Repair).
7. Leak test the fittings of the component using the J 39400-A .