Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Exhaust Temperature Sensor: Service and Repair
Exhaust Temperature Sensor Replacement - Position 2
Exhaust Temperature Sensor Replacement - Position 2
Removal Procedure
Caution: The exhaust temperature sensor and exhaust pressure differential sensor line fittings may be difficult to remove when the engine exhaust
system temperature is below 48°C (120°F). Excessive force may damage the threads in the exhaust manifold or exhaust pipe.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Disconnect the exhaust temperature sensor (3) electrical connector from the chassis wiring harness electrical connector (4).
3. Remove the exhaust temperature sensor.
Installation Procedure
