Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
27. If necessary, perform the following steps in order to remove the EGR brackets:
1. Remove the fuel injection fuel feed manifold bolt (3).
2. Remove the fuel feed pipe nut (1) and reposition the clip.
3. Remove the EGR bracket bolt (2).
4. Remove the EGR brackets (4).
28. If replacing the EGR valve cooler, perform the following steps:
1. Reposition the EGR valve cooler hose clamp and remove the hose (4).
2. Remove the EGR valve bolts (2).
3. Remove the EGR valve (3).
4. Remove and discard the EGR valve gaskets (1).
Installation Procedure
