Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
3. Install the EGR cooler pipe hose (4) to the EGR cooler tube and reposition the EGR cooler pipe clamp (3).
4. Tighten the clamp bolt (2) to 9 Nm (80 lb in).
5. Fill the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair)Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair).
