Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
3. Install the left PCV hose/pipe bolt.
Tighten the bolt to 18 Nm (13 lb ft).
4. Install the PCV hose to the air inlet pipe.
5. Position the PCV hose clamp.
6. Install the PCV hose to the clip on the top of the turbocharger.
7. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Fuel Delivery and Air Induction/Air Cleaner Housing/Air
Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
