Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Tighten the valve to 100 Nm (74 lb ft).
2. Install the glow plug module and bracket. Refer to Glow Plug Control Module Replacement (See: Glow Plug System/Glow Plug Control
Module/Service and Repair).
3. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
4. Start the engine. If the engine stalls, repeat the above step.
5. Once the engine starts, inspect for fuel leaks.
