Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
6. Position the oil level indicator tube bracket (2) to the generator bracket.
7. Install the oil level indicator tube bracket bolts (1).
Tighten the bolts to 21 Nm (15 lb ft).
8. Install the oil level indicator tube bolt (3).
Tighten the bolt to 21 Nm (15 lb ft).
9. Install the wiring harness clip to the oil level indicator tube bracket (2).
10. Position the engine wiring harness bracket onto the upper valve rocker arm cover and install the bolts (1).
Tighten the bolts to 21 Nm (15 lb ft).
11. Install the engine wiring harness clips to the wiring harness bracket.
