Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
8. Position the engine wiring harness branches to the ECT sensors and connect the ECT sensor electrical connectors (1).
9. Position and install the A/C compressor. Refer to Air Conditioning Compressor Replacement (LLY/LMM) (See: Heating and Air
Conditioning/Compressor HVAC/Service and Repair/Removal and Replacement)Air Conditioning Compressor Replacement (LU3) (See:
Heating and Air Conditioning/Compressor HVAC/Service and Repair/Removal and Replacement)Air Conditioning Compressor Replacement
(LY2, LY5, LH6, L76, L92 and LMG) (See: Heating and Air Conditioning/Compressor HVAC/Service and Repair/Removal and Replacement
)Air Conditioning Compressor Replacement (HP2) (See: Heating and Air Conditioning/Compressor HVAC/Service and Repair/Removal and
Replacement).
10. Install the water outlet tube. Refer to Water Outlet Tube Replacement (LU3) (See: Engine, Cooling and Exhaust/Cooling System/Coolant
Outlet/Service and Repair)Water Outlet Tube Replacement (LMM) (See: Engine, Cooling and Exhaust/Cooling System/Coolant Outlet/Service
and Repair).
11. Install the intake manifold tube. Refer to Intake Manifold Tube Replacement (See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service
and Repair/Intake Manifold Tube Replacement).
12. Install the generator. Refer to Generator Replacement (V6) (See: Starting and Charging/Charging System/Alternator/Service and Repair
)Generator Replacement (V8) (See: Starting and Charging/Charging System/Alternator/Service and Repair)Generator Replacement (6.6L) (See:
Starting and Charging/Charging System/Alternator/Service and Repair).
13. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
14. Start the engine. If the engine stalls, repeat the above step.
15. Once the engine starts, inspect for fuel leaks.