Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Fuel Rail: Service and Repair
Fuel Injection Fuel Rail Assembly Replacement - Bank 2
Fuel Injection Fuel Rail Assembly Replacement - Bank 2
Removal Procedure
1. Remove the fuel line bracket nut.
2. Remove the fuel line bracket from the stud.
3. Remove the charge air cooler inlet pipe. Refer to Charge Air Cooler Inlet Pipe Replacement (See: Turbocharger/Intercooler/Intercooler
Duct/Service and Repair/Charge Air Cooler Inlet Pipe Replacement).
4. Remove the positive crankcase ventilation (PCV) hose/pipe. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (See:
Emission Control Systems/Positive Crankcase Ventilation/PCV Valve Hose/Service and Repair).
5. Remove the right fuel rail fuel feed pipe. Refer to Fuel Injection Fuel Feed Front Pipe Replacement - Right Side (See: Fuel Supply Line/Service
and Repair/Fuel Injection Fuel Feed/Fuel Injection Fuel Feed Front Pipe Replacement - Right Side).
6. Remove the fuel return pipe. Refer to Fuel Return Pipe Replacement (See: Fuel Return Line/Service and Repair/Fuel Return Pipe Replacement).