Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
10. Position the fuel hose clamp (1) at the fuel return pipe.
11. Install the fuel temperature sensor. Refer to Fuel Temperature Sensor Replacement (See: Fuel Temperature Sensor/Service and Repair).
12. Install the glow plug control module and bracket. Refer to Glow Plug Control Module Replacement (See: Glow Plug System/Glow Plug Control
Module/Service and Repair).
13. Install the intake manifold tube. Refer to Intake Manifold Tube Replacement (See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service
and Repair/Intake Manifold Tube Replacement).
14. Install the water outlet. Refer to Water Outlet Tube Replacement (LU3) (See: Engine, Cooling and Exhaust/Cooling System/Coolant
Outlet/Service and Repair)Water Outlet Tube Replacement (LMM) (See: Engine, Cooling and Exhaust/Cooling System/Coolant Outlet/Service
and Repair).
15. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
16. Start the engine. If the engine stalls, repeat the above step.
17. Once the engine starts, inspect for fuel leaks.
