Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
4. Connect the fuel injection fuel return pipe to the fuel injectors.
5. Install the fuel injection fuel return pipe clips (1).
6. Install the glow plug control module. Refer to Glow Plug Control Module Replacement (See: Glow Plug System/Glow Plug Control
Module/Service and Repair).
7. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
8. Start the engine. If the engine stalls, repeat the above step.
9. Once the engine starts, inspect for fuel leaks.
