Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
3. Connect the fuel feed and return lines to the fuel tank lines. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
4. Install the fuel system cooler, if necessary. Refer to Fuel Cooler Replacement (Pickup) (See: Fuel Cooler/Service and Repair/Fuel Cooler
Replacement (Pickup))Fuel Cooler Replacement (Cab/Chassis) (See: Fuel Cooler/Service and Repair/Fuel Cooler Replacement (Cab/Chassis)).
5. Connect the fuel bundle clips (2) to the transmission brackets (1).
6. Tighten the EBCM bracket bolts (4).
Tighten the bolts to 25 Nm (18 lb ft).
7. Lower the vehicle.
