Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Fuel Supply Line: Service and Repair
Fuel Injection Fuel Feed
Fuel Feed Pipe Replacement
Fuel Feed Pipe Replacement
Removal Procedure
1. Remove the water outlet tube. Refer to Water Outlet Tube Replacement (LU3) (See: Engine, Cooling and Exhaust/Cooling System/Coolant
Outlet/Service and Repair)Water Outlet Tube Replacement (LMM) (See: Engine, Cooling and Exhaust/Cooling System/Coolant Outlet/Service
and Repair).
2. Remove the intake manifold tube. Refer to Intake Manifold Tube Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Tube Replacement).
3. Remove the generator. Refer to Generator Replacement (V6) (See: Starting and Charging/Charging System/Alternator/Service and Repair
)Generator Replacement (V8) (See: Starting and Charging/Charging System/Alternator/Service and Repair)Generator Replacement (6.6L) (See:
Starting and Charging/Charging System/Alternator/Service and Repair).
4. Disconnect the chassis fuel feed pipe quick connect fitting from the fuel feed pipe. Refer to Metal Collar Quick Connect Fitting Service (See:
Fuel Line Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service).
5. Disconnect the engine wiring harness electrical connectors (1) from the engine coolant temperature (ECT) sensors, and reposition the wiring out of
the way.