Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Fuel Injection Fuel Feed Front Pipe Replacement - Right Side
Fuel Injection Fuel Feed Front Pipe Replacement - Right Side
Removal Procedure
1. Remove the fuel feed pipe. Refer to Fuel Feed Pipe Replacement ().
2. Remove the exhaust gas recirculation (EGR) valve cooler. Refer to Exhaust Gas Recirculation Valve Cooler Replacement (See: Emission Control
Systems/Exhaust Gas Recirculation/EGR Cooler/Service and Repair/Exhaust Gas Recirculation Valve Cooler Replacement).
Note: Engine wiring harness shown removed for clarity.
3. Remove the fuel rail fuel feed pipe clamp bolts (2 and 3) and upper clamps.
4. Loosen the fuel rail fuel feed pipe fitting (1) at the left fuel rail.
5. Loosen the fuel rail fuel feed pipe fitting (4) at the right fuel rail.