Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
1. Remove the generator. Refer to Generator Replacement (V6) (See: Starting and Charging/Charging System/Alternator/Service and Repair
)Generator Replacement (V8) (See: Starting and Charging/Charging System/Alternator/Service and Repair)Generator Replacement (6.6L) (See:
Starting and Charging/Charging System/Alternator/Service and Repair).
2. Remove the fuel filter/heater element housing to fuel feed block fuel hose. Refer to Fuel Hose Replacement - Fuel Filter/Heater Element Housing
to Fuel Feed Block (See: Fuel Hose Replacement - Fuel Filter/Heater Element Housing to Fuel Feed Block).
3. Remove the intake manifold tube. Refer to Intake Manifold Tube Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Tube Replacement).
4. Remove the water outlet tube. Refer to Water Outlet Tube Replacement (LU3) (See: Engine, Cooling and Exhaust/Cooling System/Coolant
Outlet/Service and Repair)Water Outlet Tube Replacement (LMM) (See: Engine, Cooling and Exhaust/Cooling System/Coolant Outlet/Service
and Repair).
5. Reposition the fuel hose clamp (2) at the fuel injection fuel feed manifold.
6. Remove the fuel hose (4) from the fuel injection fuel feed manifold.
