Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Fuel Supply Line: Service and Repair
Fuel Hose Replacement - Fuel Injection Pump to Fuel Feed Block
Fuel Hose Replacement - Fuel Injection Pump to Fuel Feed Block
Removal Procedure
1. Remove the water outlet. Refer to Water Outlet Tube Replacement (LU3) (See: Engine, Cooling and Exhaust/Cooling System/Coolant
Outlet/Service and Repair)Water Outlet Tube Replacement (LMM) (See: Engine, Cooling and Exhaust/Cooling System/Coolant Outlet/Service
and Repair).
2. Remove the intake manifold tube. Refer to Intake Manifold Tube Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Tube Replacement).
3. Reposition the fuel hose clamp (2) at the fuel injection fuel feed manifold.
4. Reposition the fuel hose clamp (3) at the fuel injection pump.
5. Remove the fuel hose (4) from the fuel injection fuel feed manifold and injection pump.