Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Fuel Temperature Sensor: Service and Repair
Fuel Temperature Sensor Replacement
Removal Procedure
1. Remove the charge air cooler inlet pipe. Refer to Charge Air Cooler Inlet Pipe Replacement (See: Turbocharger/Intercooler/Intercooler
Duct/Service and Repair/Charge Air Cooler Inlet Pipe Replacement).
2. Disconnect the engine wiring harness electrical connector from the fuel temperature sensor.
3. Remove the fuel temperature sensor (1) from the fuel return pipe.
Installation Procedure