Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
2. Install the upper intake manifold brace and bolts.
Tighten the bolts to 24 Nm (18 lb ft).
3. Connect the engine wiring harness electrical connector (2) to the intake air valve.
4. Install the charge air cooler outlet pipe. Refer to Charge Air Cooler Outlet Pipe Replacement (See: Turbocharger/Intercooler/Intercooler
Duct/Service and Repair/Charge Air Cooler Outlet Pipe Replacement).
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Air Cleaner Housing/Service and Repair).
