Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Intercooler Duct: Service and Repair
Charge Air Cooler Inlet Pipe Replacement
Charge Air Cooler Inlet Pipe Replacement
Removal Procedure
1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Cover Replacement).
2. Loosen the charge air cooler inlet pipe connector clamp (1) at the turbocharger.
Note: Do not use a screwdriver or other tool to pry the connector loose. The connector can be torn or damaged. Loosen the connector by twisting.
3. Remove the charge air cooler inlet pipe connector (2) from the turbocharger.
4. Cover the turbocharger opening with tape in order to prevent possible entry of foreign objects.
5. Remove the wheelhouse panel. Refer to Front Wheelhouse Liner Replacement - Left Side (Chevrolet) (See: Body and Frame/Fender/Front
Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Left Side)Front Wheelhouse Liner Replacement - Left Side
(GMC) (See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Left Side).