Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Note: Lubricate the NEW washer with diesel fuel before installing.
1. Position the oil feed pipe and a NEW washer into place.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the oil feed pipe bolt.
Tighten the bolt to 34 Nm (25 lb ft).
3. Install the turbocharger. Refer to Turbocharger Replacement (See: Service and Repair/Turbocharger Replacement).
