Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Tighten the sensor to 42 Nm (31 lb ft).
3. Connect the HO2S electrical connector (6) to the engine wiring harness electrical connector (7).
4. Install the CPA retainer (5).
5. Lower the vehicle.
Tighten the sensor to 42 Nm (31 lb ft).
3. Connect the HO2S electrical connector (6) to the engine wiring harness electrical connector (7).
4. Install the CPA retainer (5).
5. Lower the vehicle.