Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
1. Position the negative battery cable to the battery.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the negative battery cable onto the battery terminal.
3. Tighten the negative cable clamp nut (1) to 5 Nm (44 lb in).
4. Close the hood.
Battery Negative Cable Disconnection and Connection (Dual Batteries)
Battery Negative Cable Disconnection and Connection (Dual Batteries)
Disconnect Procedure
Warning: Refer to Battery Disconnect Warning (See: Service Precautions).
1. Turn off all the lamps and accessories.
