Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
1. Install the auxiliary battery negative cable (2) onto the auxiliary battery negative post.
2. Tighten the auxiliary battery negative cable clamp nut (1) to 7.5 Nm (66 lb in).
3. Install the primary battery negative cable onto the primary battery negative post.
4. Tighten the primary battery negative cable clamp nut (1) to 5 Nm (44 lb in).
5. Close the hood.
Battery Negative Cable REPLACEMENT
Battery Negative Cable Replacement (Diesel)
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (See: )Battery Negative
Cable Disconnection and Connection (Dual Batteries) (See: )Battery Negative Cable Disconnection and Connection (Auxiliary Battery) (See: ).
