Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
1. Install the ground strap (2) to the vehicle and the stud on the plenum front panel.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the ground strap nut (1) to the stud on the plenum front pane and tighten to 9 Nm (80 lb in).
3. Position the ground strap (1) to the cylinder head.
4. Install the ground strap bolt (2) to the cylinder head and tighten to 16 Nm (12 lb ft).
Battery Negative Cable Disconnection and CONNECTION
Battery Negative Cable Disconnection and Connection
Disconnect Procedure
Warning: Refer to Battery Disconnect Warning (See: Service Precautions).