Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Alternator: Service and Repair
Generator Bracket Replacement
Generator Bracket Replacement (6.6L)
Removal Procedure
Warning: Refer to Battery Disconnect Warning (See: Battery/Service Precautions).
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (See: Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Dual Batteries) (See: Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Auxiliary Battery) (See: Battery/Battery
Cable/Negative/Service and Repair).
2. Remove the fan assembly. Refer to fan replacement Fan Replacement (Mechanical) (See: Engine, Cooling and Exhaust/Cooling System/Radiator
Cooling Fan/Service and Repair)Fan Replacement (Diesel) (See: Engine, Cooling and Exhaust/Cooling System/Radiator Cooling Fan/Service
and Repair).
3. Remove the intake air heater. Refer to Intake Air Heater Replacement (See: Powertrain Management/Fuel Delivery and Air Induction/Intake Air
Heater/Service and Repair).
4. Remove the generator. Refer to Generator Replacement (V6) (See: )Generator Replacement (V8) (See: )Generator Replacement (6.6L) (See: ).
5. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts,
Brackets and Accessories/Drive Belt Tensioner/Service and Repair).
6. Remove the engine wiring harness clip from the oil level indicator tube bracket (2).
7. Remove the oil level indicator tube bolt (3).
8. Remove the oil level indicator tube bracket bolts (1).
9. Remove the oil level indicator tube bracket (2).
