Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. If the generator bracket was replaced, install the idler pulleys to the generator bracket and tighten the pulley bolts (2).
Tighten the bolts to 50 Nm (37 lb ft).
2. Position the generator bracket to the engine and install the nuts and the bolts (1).
Tighten the bolts to 50 Nm (37 lb ft).
3. Position the engine wiring harness and install the engine wiring harness clip bolt (1).
Tighten the bolt to 10 Nm (89 lb in).
