Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
1. Remove the auxiliary generator. Refer to Auxiliary Generator Replacement (6.6L) (See: Auxiliary Generator Replacement (6.6L)).
2. Remove the auxiliary generator bracket bolt (2).
3. Remove the auxiliary generator bracket (1).
Installation Procedure
1. Position the auxiliary generator bracket (2) to the air conditioning (A/C) bracket.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the auxiliary generator bracket bolt (1).
Tighten the bolt to 50 Nm (37 lb ft).
3. Install the auxiliary generator. Refer to Auxiliary Generator Replacement (6.6L) (See: Auxiliary Generator Replacement (6.6L)).
Generator Replacement
