Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
4. Install the engine wiring harness terminal (3) to the generator.
5. Install the engine wiring harness nut (1).
Tighten the nut to 9 Nm (80 lb in).
6. Position the engine wiring harness boot (2) in order to cover the terminal stud.
7. Install the drive belt. Refer to Drive Belt Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and
Accessories/Drive Belt/Service and Repair).
8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (See: Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Dual Batteries) (See: Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Auxiliary Battery) (See: Battery/Battery
Cable/Negative/Service and Repair).
Generator Replacement (V8)
Generator Replacement (V8)
Removal Procedure
