Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Auxiliary Generator Replacement (6.6L)
Removal Procedure
Warning: Refer to Battery Disconnect Warning (See: Battery/Service Precautions).
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (See: Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Dual Batteries) (See: Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Auxiliary Battery) (See: Battery/Battery
Cable/Negative/Service and Repair).
2. Remove the drive belt. Refer to Drive Belt Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and
Accessories/Drive Belt/Service and Repair).
3. Disconnect the engine wiring harness electrical connector (1) from the generator.
4. Reposition the engine wiring harness boot (4) in order to access the terminal stud.
5. Remove the engine wiring harness nut (3).
6. Remove the engine wiring harness terminal (2) from the generator.
