Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Starter Solenoid: Service and Repair
Starter Solenoid Switch Replacement (Diesel)
Removal Procedure
1. Remove the starter motor. Refer to Starter Replacement (V8) (See: Starter Motor/Service and Repair)Starter Replacement (V6) (See: Starter
Motor/Service and Repair)Starter Replacement (6.6L) (See: Starter Motor/Service and Repair).
2. Reposition the M-terminal stud weather cover (1).
3. Clean the epoxy coating (2) from the M-terminal stud.
4. Loosen the M-terminal stud nut.
5. Remove the cable from the M-terminal stud.