Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Power Steering Fluid Cooler: Service and Repair
Power Steering Fluid Cooler Replacement (Without Hydroboost)
Power Steering Fluid Cooler Replacement (Without Hydroboost)
Removal Procedure
1. Remove the radiator grille. Refer to Radiator Grille Replacement (Chevrolet) (See: Body and Frame/Grille/Service and Repair/Radiator Grille
Replacement)Radiator Grille Replacement (GMC) (See: Body and Frame/Grille/Service and Repair/Radiator Grille Replacement)Radiator Grille
Replacement (Chevrolet HD) (See: Body and Frame/Grille/Service and Repair/Radiator Grille Replacement (Chevrolet HD))Radiator Grille
Replacement (GMC HD) (See: Body and Frame/Grille/Service and Repair/Radiator Grille Replacement (GMC HD)).
2. Remove as much power steering fluid as possible from the power steering fluid reservoir.
3. Place drain pans under the vehicle as needed.
Caution: Refer to Power Steering Hose Disconnected Caution (See: Power Steering Line/Hose/Service Precautions).
4. Disconnect the power steering gear outlet hose (2) from the power steering fluid cooler (4).
5. Disconnect the power steering fluid cooler hose (3) from the power steering pump (1).
6. Remove the power steering fluid cooler bolts (2) from the power steering fluid cooler (1).
7. Remove the power steering fluid cooler from the vehicle.
Installation Procedure
1. Install the power steering fluid cooler to the vehicle.
