Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the power steering fluid cooler bolts (2) to the power steering fluid cooler (1).
Tighten the bolts to 9 Nm (80 lb in).
3. Connect the power steering fluid cooler hose (3) to the power steering pump (1).
4. Connect the power steering gear outlet hose (2) to the power steering fluid cooler (4).
5. Clean any excess fluid from the vehicle and remove the drain pans.
6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair).
7. Install the radiator grille. Refer to Radiator Grille Replacement (Chevrolet) (See: Body and Frame/Grille/Service and Repair/Radiator Grille
Replacement)Radiator Grille Replacement (GMC) (See: Body and Frame/Grille/Service and Repair/Radiator Grille Replacement)Radiator Grille
Replacement (Chevrolet HD) (See: Body and Frame/Grille/Service and Repair/Radiator Grille Replacement (Chevrolet HD))Radiator Grille
Replacement (GMC HD) (See: Body and Frame/Grille/Service and Repair/Radiator Grille Replacement (GMC HD)).
