Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Shift Solenoid: Service and Repair
Control Valve Solenoid Replacement (SS1, SS2, SS3, TCC, and MAIN MOD)
Control Valve Solenoid Replacement (SS1, SS2, SS3, TCC, and MAIN MOD)
Removal Procedure
1. Remove the oil pan and the transmission internal oil filter. Refer to Oil Pan Replacement (See: Fluid Pan/Service and Repair).
2. Disconnect the internal wiring harness from the solenoid being changed.
3. Remove the solenoid retainer (2) for shift solenoid 1 (SS1) (5). Note the position of the solenoid connector and pull the solenoid (5) out of the
bore in the control valve assembly (1). The O-rings (3 and 4) provide the resistance felt during removal.
