Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
1. Install the shift lever (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the shift lever bolt (2) and tighten to 20 Nm (15 lb ft).
3. Connect all electrical connectors.
4. Position the shift lever seal.
5. Install the steering column shroud. Refer to Steering Column Shroud Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Shroud Replacement).
