Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Torque Converter: Service and Repair
Torque Converter Replacement
Special Tools
*
J 21366 Converter Holding Strap
*
J 46409 Torque Converter Lifting Handles
*
J 44723 Transmission/Stand Adaptor Plate
Removal Procedure
1. Remove the transmission from the vehicle. Refer to Transmission Replacement (See: Service and Repair).
2. Install J 21366 to restrain the torque converter.
3. Install J 44723 . Refer to Holding Fixture Installation (See: Service and Repair/Overhaul/1. Holding Fixture Installation).
4. Position the transmission vertically with the torque converter end up.
5. Remove J 21366 torque converter retaining bracket.
