Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Wiring Harness: Locations
Disassembled Views
Automatic Transmission Case
1 - Automatic Transmission Case
2 - Transmission Case Locating Pin
3 - Transmission Vent Assembly
4 - Transmission Vent Cap
5 - Transmission Vent
6 - Nameplate Rivet
7 - Nameplate
8 - Vehicle Speed Sensor Bolt, M6 x 1.0 x 13
9 - Sensor Shipping Cover
10 - Turbine Speed Sensor
11 - Vehicle Speed Sensor O-Ring
12 - Power Take-Off (PTO) Cover Gasket (2)
13 - PTO Cover (2)
14 - PTO Cover Bolt, M10 x 1.5 x 20, Flanged Head, Coated (12)
16 - Manual Shift Shaft
17 - Manual Shift Shaft Seal
18 - Manual Shift Shaft Pin
19 - Manual Shift Shaft Detent Lever/Internal Mode Switch (IMS) Assembly
20 - Park Pawl Assembly
21 - Control Valve Body Locating Pin
22 - Detent Lever/IMS Bolt
23 - Connector Shipping Cover
24 - Control Valve Body Assembly
25 - Control Valve Body Bolt, M6 x 1.0 x 50, Flanged Head (15)
26 - Manual Shift Shaft Detent Spring
27 - Manual Shift Shaft Detent Spring Bolt M6 x 1.0 x 12. Flanged Head (2)
28 - Transmission Wiring Harness Assembly
