Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
14. Using the J 24426 - installer (2) and the J 8092 - handle (1), remove the outer hub bearing and bearing cup.
15. For those vehicles equipped with RPO code JH6, use the J 45270 (1) to remove the wheel studs (2).
16. For those vehicles equipped with RPO code JH7, use a hydraulic press to remove the wheel studs.
17. Remove the rear brake disc from the rear axle hub.
Installation Procedure
1. For vehicles equipped RPO code JH7, position the brake rotor on the rear axle hub.
