chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement|Page 8606 > < Rear Axle Shaft Seal and/or Bearing Replacement|Page 8604

Silverado 2500 4WD V8-6.6L DSL Turbo (2010)

Page 6
background image

10. Turn the rear axle hub over and install the inner bearing cup.

11. Using the J 24427 - installer  (2)  and the J 8092 - handle  (1), install the inner bearing cup into the wheel hub.

12. Install the inner bearing.

Note:  Ensure the seal is fully seated in the hub bore.

13. Using the J 44420 - installer  (2)  and the J 8092 - handle  (1), install the new oil seal. 
14. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.

Rear Axle Shaft Seal and/or Bearing Replacement|Page 8606 > < Rear Axle Shaft Seal and/or Bearing Replacement|Page 8604