Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
10. Turn the rear axle hub over and install the inner bearing cup.
11. Using the J 24427 - installer (2) and the J 8092 - handle (1), install the inner bearing cup into the wheel hub.
12. Install the inner bearing.
Note: Ensure the seal is fully seated in the hub bore.
13. Using the J 44420 - installer (2) and the J 8092 - handle (1), install the new oil seal.
14. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.
