Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
5. Install the lower bolts to the rear of the fender.
Tighten the bolts to 25 N.m (18 lb ft).
6. Install the bolts in order to retain the fender to the rear pillar.
Tighten the bolts to 23 N.m (17 lb ft).
7. Install the rear taillamp assembly to the vehicle.
8. Install the bolts to the front of the fender.
Tighten the bolts to 23 N.m (17 lb ft).
9. Install the fuel filler neck to the vehicle, if removed.
