Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Sun Visor: Service and Repair
Sunshade Replacement
Removal Procedure
1. Remove the screws.
2. Disconnect the electrical connector, if equipped.
3. Remove the sunshade.
Installation Procedure
1. Connect the electrical connector, if equipped.
2. Install the sunshade.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the sunshade screws.
Tighten the screw to 2 N.m (18 lb in).