Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Tailgate Release Handle: Service and Repair
Handle Replacement - Endgate
Handle Replacement - Endgate
Removal Procedure
1. Loosen the handle bolts.
2. Remove the handle bezel by prying gently on the upper retainer tabs.
3. Disengage the linkage rods (1).
4. Remove the handle bolts.
5. Remove the handle assembly from the endgate.
Installation Procedure
1. Position the handle assembly on the endgate.
2. Install the handle bolts loosely.