Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
9. Position the engine harness to the air inlet tube.
10. Install a NEW tie strap.
11. Important: Lubricate the end of the duct prior to installation.
Install the charged air cooler outlet duct to the intake.
12. Tighten the charged air cooler outlet duct to intake hose clamp.
Tighten the clamp to 6 Nm (53 inch lbs.).
13. Install the air cleaner outlet duct.
14. Install the intake manifold cover.
