Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
8. Install the 3 bolts holding the engine mount to the engine mount frame bracket.
Tighten the engine mount to engine mount frame bracket bolts to 65 Nm (48 ft. lbs.).
9. Install the engine protection shield and bolts.
Tighten the engine protection shield bolts to 20 Nm (15 ft. lbs.).
10. Install the oil pan skid plate.
Tighten the bolts to 20 Nm (15 ft. lbs.).
11. Install the left front tire and wheel.
12. Install the front fender wheelhouse inner panel
13. Lower the vehicle.
