Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Install the right side idler pulley and bolt (1).
Tighten the bolt to 50 Nm (37 ft. lbs.).
2. Install the center idler pulley and bolt (2).
Tighten the bolt to 50 Nm (37 ft. lbs.).
3. If equipped with dual generators, install the left side idler pulley and bolt.
Tighten the bolt to 50 Nm (37 ft. lbs.).
4. Install the drive belt.
