Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube Replacement
Removal Procedure
1. Remove the oil level indicator.
2. Remove the exhaust manifold.
3. Remove the starter motor.
4. Remove the oil level indicator tube bolt at the fuel injection control module bracket.
5. Remove the oil level indicator tube and O-ring seals.
6. Remove and discard the O-ring seals.
Installation Procedure
1. Install NEW O-ring seals onto the oil level indicator tube.
2. Lightly lubricate the O-ring seals with engine oil.
