Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal Replacement
^
Tools Required
-
J 44641 Crankshaft Rear Oil Seal Remover
-
J 44642 Crankshaft Rear Oil Seal Installer
Removal Procedure
1. Remove the flywheel.
2. Clean the area around the crankshaft rear oil seal.
3. Install J 44641 to the crankshaft rear oil seal.
4. Remove the crankshaft rear oil seal using J 44641.
Installation Procedure
1. Ensure that the crankshaft is free of oil and dirt.
2. Clean the seal bore in the flywheel housing.