Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
6. Install the exhaust manifold heat shield.
7. Install the exhaust manifold heat shield bolts.
Tighten the bolts to 8 Nm (71 inch lbs.).
8. Install the exhaust pipe gasket. Align the tab on the gasket to face outward.
9. Install the exhaust pipe bolts (3, 4, and 5).
Tighten the bolts to 53 Nm (39 ft. lbs.).
10. Install the wheelhouse panel.
11. Lower the vehicle.