Silverado 2500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
7. Important: Lubricate the end of the duct prior to installation.
Install the charged air cooler outlet duct to the intake.
8. Tighten the charged air cooler outlet duct to intake hose clamp.
Tighten the clamp to 6 Nm (53 inch lbs.).
9. Remove the tape from the turbocharger openings.
Important: Lubricate the end of the duct prior to installation.
10. Install the charged air cooler inlet duct connector (4) to the turbocharger.
11. Tighten the charged air cooler inlet duct connector to turbocharger clamp (1).
Tighten the clamp to 6 Nm (53 inch lbs.).
12. Install the intake manifold cover.
